Home
Contact
Sitemap
Vacuum extruder PVP35 - used
Tunnel kiln, 54 m, 1300 ?C, gas-fired - used
Annealing furnace with circulating, 750 °C - used
Pressure casting machine, 3 pieces, used
Porcelain factory, not complete, used
Laboratory chamber furnace, 16 L, electrical heated, used
Hood furnace 1800 °C, gas heated, 3 m3, used
Chamber kiln, 6 m³, 1600 °C, gas heated, used - SOLD OUT!
Sorting system ECO-LINE, used
Ribbon transit kiln - used
Shuttle kiln, 10 m³, 1420 °C, gas heated - used - CHECK AVAILABILITY
High temperature chamber kiln160 Liter, 1750 °C, used
Shuttle kiln, gas heated, 8 m³, 1100 °C, used
Automatic line for pallet strapping, stretching and shrinking, used
Double-Jiggering machine with micro wave dryer, used
Production line with leather hard dryer for cups, used, double plant - CHECK AVAILABILITY
Natural gas Power generator - emergency power systems - used
3 pcs. Container power generator, 2500 kVA - used 
Debindering-sintering furncace, electrically heated, used
Shuttle kiln, gas heated, 28 m³, 1280 °C, used 
Tunnel kiln - Fast firing kiln - approx. 23 Meter !!!
Products
« Category overview | Complete Plants
Kiln plant, complete, consisting of(Article number: 1956)
|
 Memo Inquiry Print |
||||||
| Manufacturer: | Eisenmann | ||||||
|---|---|---|---|---|---|---|---|
| Type: | unbekannt-unknown | ||||||
| Year of construction: | 1997 | ||||||
| Description: | 2 pcs. shuttle kilns, with lift gate Brand: Eisenmann Year of construction: 1997 Useful volume: each approx. 15 m³ Firing temperature: 1250 ° C Heating: Natural Gas, LL Hu = 9,26 kWh/m³ Heating power: 1800 kW Firing cycle: cold - cold from 7,5 - 12 h can be Outside light dimensions 2900x4620x1750 mm (lxwxh) Dimensions of case: Width: 3600 mm Length without goals: approx 4620 mm Height without exhaust duct: approx 2950 mm Lining: Fiber modules and firebricks Number of kiln cars: 1 pc. on rails bounded Length of the rails: approx. 18 m Edging: burning packages Weight of the kiln, complete: approx. 12,5 to 2 pcs. loading and unloading systeme 1 pc. of waste heat utilization Common hot-water heat exchanger (for both kilns) Exhaust gas flow rate: about 9000 Nm³/h Warm water flow: approx .45 Nm³/h Exhaust gas inlet temperature: max. 550 °C Exhaust gas outlet temperature: max. 250 °C Hot water temperature - Flow: 90 °C - Return: 70 °C Heat capacity: 1017 kW Dimensions: 2500x2630x2100 mm (lxwxh) |
||||||
| Quantity: | 1 pc | ||||||
| Data in accordance with manufacturer | |||||||
     |
|||||||