Products
« Category overview | Separator
Magnetic separator,Type RE300/201 – FE90/20/1 ,ERIEZ(Article number: 2327)
|
Memo Inquiry |
||||||
Manufacturer: | ERIEZ | ||||||
---|---|---|---|---|---|---|---|
Type: | RE300/201 – FE90/20/120 | ||||||
Year of construction: | 2002 | ||||||
Description: | inclucuding HC56 Feeder unit Comprising: 1 – HC56 Vibratory Feeder I/P: - 220V, 1 Ph, 50 Hz 3.3 Amps FLC VIA 1 –RE0VIB 5141 Control, chassis type (6 amp capacity) I/P: - 220V, 1 Ph, 50 Hz O/P:- To HC56 variable voltage, 1Ph, 50Hz Magnet Rolls: 1-Ferrite Roll motor & 1 RE Roll motor (variable speed via separate inverters) Each motor delta connected 0.25 kW I/P to inverter: 220 V, 1 Ph, 50 Hz O/P to motor: 220 V, 3 Ph, Variable frequency FLC per motor at 50 Hz, approx. 1.6 amps. ELTEX ES51 / S20A. Power unit – TO 2 anti static discharge bars. Note: Discharge bars “on” whenever motors are running Important – The Eltex power unit are fitted to the magnet roll units & the customer must make the connection to the control panel. Control Requirments Housing: - IP54 Wall mounted enclosure Power supply: 380 V, 3 Ph, 50 Hz + neutral Comprising: Door input isolator Supply, push buttons & potentiometers, to Reovib control & Vibratory feeder. Supplies to contactors, overload & inverters to both rolls. Above with all necessary circuit breakers, terminals & volt free contacts + audible alarm. Mode of Operation Manuel & Remote connection for customer Both rolls to be started and run up to speed: a) Top Roll set speed via inverter b) Bottom Roll (RE) set speed via inverter c) Eltex unit running whenever roll motors are running d) The vibratory feeder to be started and set to feed rate via Reovib control. |
||||||
Quantity: | 1 pc. | ||||||
Data in accordance with manufacturer | |||||||