Home
Contact
Sitemap
Vacuum extruder PVP35 - used
Tunnel kiln, 54 m, 1300 ?C, gas-fired - used
Annealing furnace with circulating, 750 °C - used
Pressure casting machine, 3 pieces, used
Porcelain factory, not complete, used
Laboratory chamber furnace, 16 L, electrical heated, used
Hood furnace 1800 °C, gas heated, 3 m3, used
Chamber kiln, 6 m³, 1600 °C, gas heated, used - SOLD OUT!
Sorting system ECO-LINE, used
Ribbon transit kiln - used
Shuttle kiln, 10 m³, 1420 °C, gas heated - used - CHECK AVAILABILITY
High temperature chamber kiln160 Liter, 1750 °C, used
Shuttle kiln, gas heated, 8 m³, 1100 °C, used
Automatic line for pallet strapping, stretching and shrinking, used
Double-Jiggering machine with micro wave dryer, used
Production line with leather hard dryer for cups, used, double plant - CHECK AVAILABILITY
Natural gas Power generator - emergency power systems - used
3 pcs. Container power generator, 2500 kVA - used 
Debindering-sintering furncace, electrically heated, used
Shuttle kiln, gas heated, 28 m³, 1280 °C, used 
Tunnel kiln - Fast firing kiln - approx. 23 Meter !!!
Products
« Category overview | jiggering line
Cup / mug production line - NEW(Article number: 2734)
|
 Memo Inquiry Print |
||||||
| Manufacturer: | EU | ||||||
|---|---|---|---|---|---|---|---|
| Type: | Tassen-Becheranlage | ||||||
| Year of construction: | - | ||||||
| Description: | Cup production line, consisting of: - turning machine - Leather Hard jet dryer - Edge cleaning unit with loader for entering and Removal of the products from the purification plant - Conditioning to control the shapes - Electrical distribution and electrical installation, control system - Work for the manual gluing of handles - Worktable and indexing conveyor gross power theoretical: max. 600 pcs/h (cycle 6 sec) optimum: approx. 490 – 500 pcs/h (cycle 7 sec) max. product height (=mould depth): 150 mm max. product diameter: 120 mm max. product height (=mould depth): 175 mm number of forming moulds per set: 82 pcs revolutions of forming spindle with mould: 1460 rpm matrix revolutions: 180 rpm forming matrix tilt angle: 0 – 15 ° “detachment gap“ of forming spindle: 0 – 15 mm input forming material humidity: approx. 21 – 23 % Clot max. dimensions: 150 x 500 mm heating medium: natural gas dryer phase I max. temperature: 95 °C output product humidity: approx. 14 – 16% dryer phase II total number of benches: 112 pcs number of products per bench: 8 (10) pcs number of populated benches in drying part: approx. 88 pcs number of benches in return line: approx. 12 pcs number of products in dryer: approx. 704 (880) pcs advance of benches: infinitely variable output product humidity: approx. 2 % consumption of pressure air: approx. 250 Nm3/h connection of pressure air: Js 1/2“ with closing valve required overpressure of air: min. 5.5 bar service water connection: Js 1/2“ with closing valve waste to white technolog. water: Js 1 1/2“ Description of Equipment (machinery) and its Function 1. Material Feeding Conveyor 2. Vacuum Press 3. Cutting and Transporting Equipment 4. Forming 5. Mould Conveyor 6. Dryer to Skinny State 7. Transporter of Products from Dryer to Skinny State 8. Sponging of Product Edges 9. Transporter of Products from the Edge Sponging Device 10. Manual gluing of handles 11. Dryer to white state 12. Production in split moulds 13. Electrical equipment of the production line |
||||||
| Quantity: | 1 Pc. | ||||||
| Data in accordance with manufacturer | |||||||
     |
|||||||