Home
Contact
Sitemap
Vacuum extruder PVP35 - used
Tunnel kiln, 54 m, 1300 ?C, gas-fired - used
Annealing furnace with circulating, 750 °C - used
Pressure casting machine, 3 pieces, used
Porcelain factory, not complete, used
Laboratory chamber furnace, 16 L, electrical heated, used
Hood furnace 1800 °C, gas heated, 3 m3, used
Chamber kiln, 6 m³, 1600 °C, gas heated, used - SOLD OUT!
Sorting system ECO-LINE, used
Ribbon transit kiln - used
Shuttle kiln, 10 m³, 1420 °C, gas heated - used - CHECK AVAILABILITY
High temperature chamber kiln160 Liter, 1750 °C, used
Shuttle kiln, gas heated, 8 m³, 1100 °C, used
Automatic line for pallet strapping, stretching and shrinking, used
Double-Jiggering machine with micro wave dryer, used
Production line with leather hard dryer for cups, used, double plant - CHECK AVAILABILITY
Natural gas Power generator - emergency power systems - used
3 pcs. Container power generator, 2500 kVA - used 
Debindering-sintering furncace, electrically heated, used
Shuttle kiln, gas heated, 28 m³, 1280 °C, used 
Tunnel kiln - Fast firing kiln - approx. 23 Meter !!!
Products
« Category overview | Kilns, furnaces » gas heated
Multipurpose chamber kiln plant, gas heated, used(Article number: 2456)
|
 Memo Inquiry Print |
||||||
| Manufacturer: | Leybold | ||||||
|---|---|---|---|---|---|---|---|
| Type: | GKUQrg 2/70/*65/110 | ||||||
| Year of construction: | 1994 | ||||||
| Description: | Kiln plant: Dimensions Outside: approx. 7550x3600x4900 mm (lxwxh) Working height above ground: 1200 mm Basic rust dimensions: 1100x705x50 mm (lxwxh) Batch useful volume inclusive basic rust: 1100x700x650 mm (lxwxh) Loading height of the rust: approx. 600 mm Weight of the rust: approx.65 kg Gross charge weight inclusive base rust: 1000 kg Oil immersed content: about (150 °C) 4500 l Empty weight of the kiln: approx. 21000 kg Operating weight of the kiln with oil and batch: approx. 27300 kg Electrical specifications: Mains voltage: 380 V, 50 Hz Control voltage: 220 V, 50 Hz Valve voltage: 24 V DC Power consumption: 81.25 kW Gas supply: Form (on-site) for propane, natural gas 70-100 mbar Natural gas consumption: each pilot burner approx.340 l / h Natural gas consumption safety of combustion (flames and ignition boxes veil): 7.0 m³ / h Gas heating (version 1000 °C): Number of burners: 20 radiant tube burner Max. Fuel comsumption: Natural gas (HU = 8500 kcal / Nm = 35600 kJ 22 Nm³ / h Protective or reaction gases Pressure compensation prechamber nitrogen per cycle (4-6 bar storage site): 4 Nm³ / cycle Safety gas (purge) nitrogen (3 bar on site) approx 20-24 Nm³ / h Carburizing gas (3 bar on site) propane: 600 Nl / h Karbonitriergas (3 bar on site) Ammonia: 2400 NI / h Exhaust burnt fuel gas / air mixture (80 °C) Gas heating: approx.100 m³ / min Pre chamber door: approx 25 m³ / min Ex-flap: approx. 24 m³ / min Flaring: approx. 15 m³ / min Total amount of exhaust gas: approx. 69 m³ / min Cooling water Temperature at the inlet: approx. 20 - 25 °C Temperature at the outlet: approx. 40 - 50 °C Mains system pressure at site: 3 to 3.5 bar Power consumption for heating chamber fan: approx. 1.0 m³/h Power consumption for oil cooling system per cycle: 7.0 m³ / h Cooling a 900 kg - Charge in oil of 920 °C to ... °C: approx. 45 min Furnace characteristics depending on the heating chamber Heating power (heat-up) 20-850 °C: 600 kg / h Idling consumption at 850 °C: approx. 39100 kcal / h (1626500 kJ / h) Heating chamber volume approx. 21.0 m³ At oil bath filling: approx. 15,4 m³ |
||||||
| Quantity: | 1 Pcs. | ||||||
| Data in accordance with manufacturer | |||||||
     |
|||||||