Home
Contact
Sitemap
Vacuum extruder PVP35 - used
Tunnel kiln, 54 m, 1300 ?C, gas-fired - used
Annealing furnace with circulating, 750 °C - used
Pressure casting machine, 3 pieces, used
Porcelain factory, not complete, used
Laboratory chamber furnace, 16 L, electrical heated, used
Hood furnace 1800 °C, gas heated, 3 m3, used
Chamber kiln, 6 m³, 1600 °C, gas heated, used - SOLD OUT!
Sorting system ECO-LINE, used
Ribbon transit kiln - used
Shuttle kiln, 10 m³, 1420 °C, gas heated - used - CHECK AVAILABILITY
High temperature chamber kiln160 Liter, 1750 °C, used
Shuttle kiln, gas heated, 8 m³, 1100 °C, used
Automatic line for pallet strapping, stretching and shrinking, used
Double-Jiggering machine with micro wave dryer, used
Production line with leather hard dryer for cups, used, double plant - CHECK AVAILABILITY
Natural gas Power generator - emergency power systems - used
3 pcs. Container power generator, 2500 kVA - used 
Debindering-sintering furncace, electrically heated, used
Shuttle kiln, gas heated, 28 m³, 1280 °C, used 
Tunnel kiln - Fast firing kiln - approx. 23 Meter !!!
Products
« Category overview | Kilns, furnaces
Continuous belt furnace, with thermal afterburning with O2 analysis,
for debinding, used - SOLD OUT(Article number: 3311)
|
 Memo Inquiry Print |
||||||
| Manufacturer: | EU | ||||||
|---|---|---|---|---|---|---|---|
| Type: | Banddurchlaufofen | ||||||
| Year of construction: | 2012 | ||||||
| Description: | Working temperature: approx. 600 °C Operating temperature: max. 850 °C Dimensions (lxwxh) Kiln: approx. 4210x1140x1550 mm Outside: approx. 14075x1550x1550 mm w: without fumigation cabinets h: without exhaust air piping and TNV Duct width furnace: approx. 460 mm Clear bandwidth: 350 mm Channel height above conveyor belt infeed / passage height of the parts: approx. 30 mm Channel height above the band in the muffle: approx. 50 mm Center distance of the drive and deflection drum: approx. 13825 mm Inlet / loading: approx. 1550x1040x1000 mm (lxwxh) Inlet / gas locks: approx. 1550x1040x1000 mm (lxwxh) Heated length kiln: approx. 3755 mm (3 spatial heating zones, 5 control zones) Spout / removal: approx. 1305x1040x1550 mm (lxwxh) Conveying level over the floor: 1005 mm Parts dimensions 60x30x15 mm (wxdxh) Weight per molded part (wet): approx. 200 g Process time: approx. 60 minutes Throughput: approx. 450 parts / hour Electrical connection: 400 V / 3 phases / N / PE / 50 Hz Power cord: 5x50 mm² Cu Fuse protection: 125 A gG Heating power: 60 kW (5x12 kW) Belt speed: approx. 100 mm / min. Exhaust chimneys: Zone 1: 1 throttle valve, manually operated, NW 80 Zone 2: 2 throttle valves, manually operated, NW 80 Further exhaust air piping: NW 80 (pipe 88.9x3 1.4574) to the TNV Triple O² measurement from M&C Techn Group Control cabinet: approx. 810x610x2000 mm (wxdxh) Radiator in a separate frame: approx. 495x450x730xmm (wxdxh) Dimensions (wxdxh) Thermal afterburning Control cabinet: approx. 600x260x1020 mm Control and regulation system Control cabinet: approx. 1200x600x2200 mm Fumigation cabinet / inlet side: approx. 1000x300x1400 mm Fumigation cabinet / discharge side: approx. 800x300x1200 mm Condition: used |
||||||
| Quantity: | 1 Pc. | ||||||
| Data in accordance with manufacturer | |||||||
    |
|||||||