Home
Contact
Sitemap
Vacuum extruder PVP35 - used
Tunnel kiln, 54 m, 1300 ?C, gas-fired - used
Annealing furnace with circulating, 750 °C - used
Pressure casting machine, 3 pieces, used
Porcelain factory, not complete, used
Laboratory chamber furnace, 16 L, electrical heated, used
Hood furnace 1800 °C, gas heated, 3 m3, used
Chamber kiln, 6 m³, 1600 °C, gas heated, used - SOLD OUT!
Sorting system ECO-LINE, used
Ribbon transit kiln - used
Shuttle kiln, 10 m³, 1420 °C, gas heated - used - CHECK AVAILABILITY
High temperature chamber kiln160 Liter, 1750 °C, used
Shuttle kiln, gas heated, 8 m³, 1100 °C, used
Automatic line for pallet strapping, stretching and shrinking, used
Double-Jiggering machine with micro wave dryer, used
Production line with leather hard dryer for cups, used, double plant - CHECK AVAILABILITY
Natural gas Power generator - emergency power systems - used
3 pcs. Container power generator, 2500 kVA - used 
Debindering-sintering furncace, electrically heated, used
Shuttle kiln, gas heated, 28 m³, 1280 °C, used 
Tunnel kiln - Fast firing kiln - approx. 23 Meter !!!
Products
« Category overview | SINTER PLANT
Walking beam furnace for sintering under protective gas atmosphere,
used(Article number: 3131)
| Manufacturer: | EU |
 Memo Inquiry Print |
|---|---|---|
| Type: | / | |
| Year of construction: | 2016 | |
| Description: | Temperature: 1450 °C max. Through put: 100 kg/h Heating rates: Up to 600°C with 300 K/h From 600°C to Sintering with 600 K/h Soaking time 1h at max. push rate Natural cooling Tray size (outer dimensions): 330 x 330 x 40 mm³ Number of heating zones: 5 preheat (1100 °C, 21 kW) and 4 high heat (1450 °C, 35 kW) Dimensions (lxwxh) Muffle inner cross section: 360x120 mm Loadable area: approx. 325x325 mm² Length of pre heating zone: 5600 mm Length of high heating zone: 4800 mm Length of cooling zone incl. drives: 5000 mm Connected load current: 260 kW Gas connection and gas types: Hydrogen 3.0 100mbar 1” Pipe Nitrogen 3.0 150mbar 1,5” Pipe Natural Gas or Methane ½” 30 mbar Water connection: Input: 3/4” Pipe 2-4bar Drain: 2” Pipe pressure less Consumption: 1-2 m³/h Process gas consumption Approx. 10 Nm³/h with no waxes in the pars 15 Nm³/h with waxes with control cabinet and control CE-Certificate Conditon: used, good |
|
| Quantity: | 1 | |
| Data in accordance with manufacturer | ||