Home
Contact
Sitemap
Vacuum extruder PVP35 - used
Tunnel kiln, 54 m, 1300 ?C, gas-fired - used
Annealing furnace with circulating, 750 °C - used
Pressure casting machine, 3 pieces, used
Porcelain factory, not complete, used
Laboratory chamber furnace, 16 L, electrical heated, used
Hood furnace 1800 °C, gas heated, 3 m3, used
Chamber kiln, 6 m³, 1600 °C, gas heated, used - SOLD OUT!
Sorting system ECO-LINE, used
Ribbon transit kiln - used
Shuttle kiln, 10 m³, 1420 °C, gas heated - used - CHECK AVAILABILITY
High temperature chamber kiln160 Liter, 1750 °C, used
Shuttle kiln, gas heated, 8 m³, 1100 °C, used
Automatic line for pallet strapping, stretching and shrinking, used
Double-Jiggering machine with micro wave dryer, used
Production line with leather hard dryer for cups, used, double plant - CHECK AVAILABILITY
Natural gas Power generator - emergency power systems - used
3 pcs. Container power generator, 2500 kVA - used 
Debindering-sintering furncace, electrically heated, used
Shuttle kiln, gas heated, 28 m³, 1280 °C, used 
Tunnel kiln - Fast firing kiln - approx. 23 Meter !!!
Products
Rotary screen feeder (refurbished), used - SOLD OUT(Article number: 944)
|
 Memo Inquiry Print |
||||||
| Manufacturer: | Rieter | ||||||
|---|---|---|---|---|---|---|---|
| Type: | SR 1900 (Normalausführung) | ||||||
| Year of construction: | 1962 | ||||||
| Description: | Transmission case: Three-point edition Tub diameter: 1.900 mm Tub height without essay: 1.000 mm Collecting plate diameter: 3.200 mm Transmission gear ratio: I = 40 Drive pinion wave: Z = 15, m = 10 Z = 66, and ninepin wheel rim m = 10: two conical straight dovetailing a vertical pinion shaft of 110 on 130 mm Ø strengthened Top part Ø 1.900 x 1.010 mm high: without, however, you can make against surcharge on request Execution for 10 pieces of in sieves 580 x 570 x 10 mm thick, though without sieves. Is not required for normal business, but only if a buffer zone shall be created. Machine with ball stored drive drive-belt disk Ø 1220 mm, 320 mm wide, 11 grooves, profile 22, flange connected of pneumatic clutch "ÖRTLINGHAUS", type 0-901-200-63, Bg. 80 H7, air introduction and Original RIETER breaking bolt tin safeguarding. Rotary screen feeder complete with Mixing and stirring arm system (three-armed straight end trick arm), Bo. 180 mm Ø + one- armed upper stirring arm Bo. 180 mm Ø included driven the end trick arm - circulating collecting plate, complete separately contrary to - : Collecting plate gear motor "SEW -EURODRIVE“, type RF82 DV112M 4, 4 kW = 5.5 hp, 1420/72 n, i = 19,64, 400/690 volt, 8,8/5,1 A., IP54, V3, isol. Class "B", 50 Hz, 99.8 kg, Lubricant mineral oil CLP 220, with pinion outside-Ø 144 x 80 mm broad, Z = 18, m = 8. Transmission of grand piano cell pump drawing in with themselves, "tree-stump" Type EF-NO, M98 and E engine 0.37 kW, with pressure controller "Jeschar-Controls" and oil filter "ARGO-HYTOS" for the pressure lubrication, Machine with loose drive unit, i.e. engine v-belt pulley corresponding to it with an E engine lent your throughput performance, though without drive-belts and without protective covering (local place conditions are not confessed there) Accessories: a shift rack from professional quiet to corridor height Condition: Machine and transmissions completely taken to pieces, steam cleaned with high-pressure steam cleaner, refurbished among other things all store, shaft seals and tins replace out trick arm and upper stirring arm armour-plated - the big gear wheel Z = 116, m = by 180° revolvedly 12, the drive pinion shaft = so that it is running in new tooth flanks now - Z, 15 m = 10 and the crown wheel Z = 66, in a conical straight dovetailing m = 10 faultless - these is a vertical pinion shaft Z = 13, m = faultlessly 12 everything put together, undercoated and spray lacquered RAL 6017 (may green) |
||||||
| Quantity: | 1 pc | ||||||
| Data in accordance with manufacturer | |||||||
     |
|||||||